The 3rd International Conference on Material Strength and Applied Mechanics (MSAM 2020)
August 10-13, 2020, Macao, China
Technical Program Committee:

Prof. Giovanni Meneghetti, Department of Industrial Engineering, University of Padovavia, Italy
Prof. Alberto J. García, Deparment of Mechanical Engineering, University of Jaén, Spain
Prof. Lyes Douadji, Intelligent Industrial Design Center, Chongqing Institute of Green and Intelligent Technology, Chinese Academy of Sciences, China
Prof. John D. Clayton, University of Maryland & US Army Research Laboratory (ARL), USA
Prof. Dae-Eun Kim, Yonsei University, Seoul, Korea
Prof. Ji Wang, Faculty of Mechanical Engineering and Mechanics, Ningbo University, China
Prof. J. C. Wang, Department of Marine Engineering, College of Maritime Science and Management, National Taiwan Ocean University, Taiwan
Prof. Magd Abdel Wahab, Laboratory Soete, Technologiepark Zwijnaarde, Ghent University, Belgium
Prof. Mohammad Ferdows, University of Dhaka, Bangladesh
Prof. Ricardo Branco, Department of Mechanical Engineering, University of Coimbra, Portugal
Prof. Panagiotis E. Tsiakaras, Department of Mechanical Engineering, University of Thessaly, Greece
Prof. Abdelkader Doudou, OLMAN Laboratory, Multidisciplinary Faculty of Nador, Mohamed First University, Morocco
Prof. V. Sampath, Department of Metallurgical and Materials Engineering, Indian Institute of Technology Madras, India
Prof. Sahar Ibrahim Hamed Mostafa, Faculty of Science, Mansoura University, Egypt
Prof. Raafat El-Hacha, Department of Civil Engineering, Schulich School of Engineering, University of Calgary, University of Calgary
Prof. Chil-Chyuan Kuo, Department of Mechanical Engineering, Ming Chi University of Technology, Taiwan
Prof. Xiang-Guo Wu, Division of Concrete Structure and Masonry Structure, School of Civil Engineering, Harbin Institute of Technology, China
Assoc. Prof. Nobile Riccardo, Department of Engineering for Innovation, University of Salento, Italy
Assoc. Prof. Haci Mehmet BASKONUS, Department of Computer Engineering, Munzur University, Turkey
Assoc. Prof. Xu Long, School of Mechanics, Civil Engineering and Architecture, Northwestern Polytechnical University, China
Assoc. Prof. Janak B. Valaki, Mechanical Engineering Department, Government Engineering College, India
Assoc. Prof. Azeez A. Barzinjy, Department of Materials Science, Salahaddin University-Erbil, Iraq
Assist. Prof. ChaBum Lee, Department of Mechanical Engineering, Texas A&M University, USA
Assist. Prof. Lydia Anggraini, Faculty of Engineering, President University, Indonesia
Dr. Anastasiia Krushynska, Engineering and Technology Institute Groningen, Faculty of Science and Engineering, University of Groningen, Netherlands
Dr. Habil. Tadeusz Szymczak, Centre for Material Testing, Motor Transport Institute, Poland
Dr. Yuling Niu, Qualcomm Technology Inc., USA
Dr. Apiwat Suyabodha, Automotive Engineering Department, Rangsit Univeristy, Thailand
Dr. Ludovic Jason, Atomic Energy and Alternative Energy Commission, France
Dr. Magdalena Speicher, Department Non-Destructive Testing and Material, Materials Testing Institute (MPA) University of Stuttgart, Germany
Dr. Mithila Achintha, University of Southampton, United Kingdom
Dr. Feng Cai, Princeton Plasma Physics Laboratory, Princeton University, USA
Dr. Kong Fah TEE, Department of Engineering Science, University of Greenwich, United Kingdom
Dr. Arnulfo Luévanos Rojas, Institute of Multidisciplinary Researches, Autonomous University of Coahuila, Mexico
Dr. Meng Xianming, China Automotive Technology and Research Center, China
Dr. Hab. Eng. Mirosław Kwiatkowski, Faculty of Energy and Fuels, AGH-University of Science and Technology (AGH-UST), Poland
Dr. Payam Shafigh, Department of Building Surveying, Faculty of Built Environment, University of Malaya, Malaysia
Dr. Joana Mesquita-Guimarães, TEMA - Centre for Mechanical Technology and Automation, University of Aveiro, Portugal

The 3rd International Conference on Material Strength and Applied Mechanics (MSAM 2020)
Conference Secretary: Ms. Li Chen
Email: msam@msamconf.org   Tel: +86-18154309082